Combined Heat and Power

Go Greener Energy offers a range of Combined Heat and Power (CHP) units to enable clients who have a significant heat load, as well as an electricity requirement to significantly boost their energy efficiency and reduce their total energy costs by up to 50%.

A range of financial incentives such as the Enhanced Capital Allowances (ECA) and CCL exemption are possible helping to make the investment even more financially attractive. In some circumstances where Biogas is available, access to the UK Feed in Tariffs is possible.

Technology & Applications

For small applications up to 300kW electrical a range of gas fired CHP units with internal combustion engines is available. Typical applications include hospitals, shopping centres, and schools.

For larger applications with >300kW electrical output a range of Organic Rankine cycle units can be supplied providing very high levels of plant availability. Typical applications are factories and district heating/power schemes.

A range of lower output CHP units is also available where Biomass is the chosen fuel and the installations are not large <100kW.

Best Value

Go Greener offers the best possible value by supplying direct from the manufacturer. Call us now to find out more.

PV Solar & Wind

Go Greener Energy offer a range of high quality PV Solar and Wind Power systems built to the highest standards to enable clients to gain access to the UK Feed In Tariffs and maximise financial returns.

Energy Storage

Technologies and Applications

SLA - Sealed lead acid units for lower power, low maintenance applications. Our range covers typically applications up to 250Ah

Lead Acid – Covers all applications, including very high capacity, with cells up to 4,000Ah. Specific ranges are available for Renewable Energy applications such as Solar and Wind where high levels of cyclic loading as well as a comprehensive range for dc back-up power applications. A low maintenance range is also available for applications where top up maintenance is difficult or expensive.

Lithium - These batteries use the latest in Lithium cell technology combined with an active battery management system to deliver a long life. These batteries offer the very highest levels of reliability and the ultimate failure of a cell does not compromise the whole battery, unlike lead systems. These batteries are very compact and also offer excellent high temperature performance. They can be co-located with other sensitive electronic equipment because there is no hydrogen release.

NiCd – These batteries are used for diesel starting applications.

Hydro Generation

Go Greener Energy offer a comprehensive range of Hydro Power equipment suitable for Hydro installations from 50kW to 20MW

Hydropower can be one of the most cost effective ways of producing  renewable electricity, and generally offers higher efficiency (typically 70-90%) compared with  other sources such as wind and solar PV. Load outputs are typically highly predictable and load factors are usually much higher than solar PV (15%)  or wind installations (30%). Paybacks are also typically the shortest available from any of the renewable technologies particularly for high head applications.

A comprehensive range of turbine equipment including Pelton, Francis, Kaplan and Archimedean turbines is offered to cover high, medium and low head applications. Where capital costs are a major constraint a lower cost range of turbines is also available together with simple pre-fabricated steel penstocks.

These systems deliver very high levels of reliability combined with long operational lifetimes of up to 50 years. Maintenance costs are also low over the installation’s lifetime and are typically  just 1-2%. It is also likely that hydropower has a better energy payback ratio than other power generation technologies. All of these units would be eligible for the renewable energy Feed in Tariffs.

Best Value

Go Greener offers the best possible value by supplying equipment direct from the manufacturer and is also able to provide a turnkey solution. Call us now to find out more.

Diesel  & Gas Generators

Technology & Applications

Diesel Generators can be supplied with Caterpillar, MTU, Cummins and other engine options. The smaller Generator units are available in sound attenuated cabinets, and the larger Generators can be supplied as fixed units or mobile packaged units in standardized containers.

A range of outputs is available from 35kW to 2MW. The engines used are of the highest quality and efficiencies of around 240 litres/MWhr are typical for the diesel powered units.  A heavy fuel oil option is also available for the larger units.

A range of Gas engine generators is also available which can run on Natural Gas or Biogas. These generators enable clients who have access to Biogas from Anaerobic Digesters to access the UK Feed in Tariffs and achieve higher levels of returns.

These gas engines are highly reliable reciprocating engines, housed in sound attenuated containments. They are suitable for use in industrial or agricultural buildings. The units are maintained under a service contract to ensure the highest levels of reliability.

A range of MW class Gas Turbine packaged Generators is also available. Further details available on request.

Best Value

Go Greener offers the best possible value by supplying direct from the manufacturer. Further technical details of this comprehensive range and the leadtimes for specialist products are available on request.